Zhermack Cyclope, User Manual

Page: 9 / 16

19
cyclope The reference figures can be found on pages 3 and 4 of this manual.
EN
• polystyrene/plastic: pollutant material, do not burn
(toxic fumes) or dispose of in the environment.
Dispose of these materials in compliance with the
regulations in force in the country of use.
If the equipment is to be dismantled, the operator
must be in charge of dismantling, elimination and
re-cycling of the following materials in compliance
with the EEC Directives and the laws in force in the
country of use:
• plastic parts; steel parts; glass parts; insulated
electric cables; rubber parts.
• there are no toxic or corrosive substances.
The device must not be disposed of as
urban waste. At the end of its working
life, it must be taken to a waste
separation and recycling centre in
compliance with European Directive no.
2002/96/EC or in accordance with the
legislation in force in the country of sale.
CHAPTER 6: INSTALLATION AND COMMISSIONING
6.1 WARNINGS AND PRECAUTIONS
Before carrying out installation, make sure that all
safety conditions exist and follow the indications
given below carefully.
6.2 ACCEPTED ENVIRONMENTAL CONDITIONS
Unless stated otherwise, at the time of ordering,
it is intended that the equipment must be
envisioned to function regularly in the following
environmental conditions:
Place of Use
Indoors
Altitude Up to 2000 m
Working temperature From 10°C to 35°C
Humidity Max 80%
Conditions different to those prescribed can cause
anomalies or sudden breakdown. Lighting in the
installation area of the equipment must be sufficient
to guarantee good visibility in all points of the
equipment. Luminosity not less than 200 lux must be
guaranteed. The lighting must be uniform without
reflections, which could dazzle the operator.
The equipment itself cannot cause
explosions or fire: the equipment is not
prepared and/or designed to operate in
environments with explosive atmosphere or
with the risk of fire.
The working area lighting plant is an
important factor for the safety of persons
and the quality of work. In Italy this subject
is governed by a Ministerial Decree that
clearly determines the average level of
prescribed lighting. In other countries the
regulations in force are valid regarding
accident-prevention and hygiene in the
workplace.
during transport and that the packaging has not
been tampered with, resulting in missing parts.
Should any damage or missing parts be noted,
inform the Dealer and the Carrier immediately by
forwarding photographic evidence. The packaging,
made up of a cardboard box with expanded plastic
internal protections, contains:
• the cyclope equipment;
• the material supplied (see par. 4.2.1);
• the Use and Maintenance Manual.
• It is recommended that you keep the
original packaging (see paragraph 5.3).
• The customer is responsible for ensuring
that the product delivered to the
manufacturer is properly packaged. The
manufacturer is not liable for any defects,
malfunctions or damage to the product
due to the use of packaging that is not
suitable or of the same or higher quality
than that used for the original delivery.
5.3 TRANSPORT AND hANDLING
If the equipment must be moved:
• disconnect the equipment from the electric point;
• hold the equipment, always keeping it in a
vertical position. Regarding this, pay attention to
the weight and clearance of the equipment (see
par. 4.2.2), in order to prevent any type of damage
occurring due to the failure of considering these
values;
• pack the equipment in the original packaging. If
this is not possible, take all necessary precautions
to protect the equipment from knocks and drops,
as the goods are transported at the owner’s risk.
Failure to comply with the rules stated
above relieve the Manufacturer from any
liability regarding equipment
malfunctioning and consequently makes
the warranty null and void.
When shipping and/or delivering the
equipment to an Authorised After-Sales
Centre always enclose a copy of the
purchase document and a copy of the
properly filled-in identification form. If the
equipment is transported by carrier, the
Postal Service or rail, it is recommended to
insure the shipment.
Before transporting the device, make sure
the safety knobs are in place and tightly
fixed. Use the original packaging. Failure to
respect these precautions could result in
damage to the device.
5.4 DISPOSAL / DISMANTLING
When disposing of the packaging material the user
must follow the regulations in force in the country
of use relative to the following materials:
• wood/paper: non-polluting materials, but must
be re-cycled correctly;