Zhermack Cyclope, User Manual

Page: 6 / 16

16
cyclope The reference figures can be found on pages 3 and 4 of this manual.
EN
CHAPTER 1: INTRODUCTION
1.1 hOW TO READ AND USE ThE USE AND
MAINTENANCE MANUAL
This use and maintenance manual provides
information on the installation, use and
maintenance of the cyclope device, designed and
made by Zhermack S.p.A. to heat metal spatulas
and similar instruments used to model dental wax.
• The equipment must be used in compliance
with that specified in this Manual: it is therefore
recommended that the manual is read carefully
prior to installation and start-up. Make sure that
you read the entire manual and pay particular
attention to messages written in bold type or
items highlighted by boxes and/or symbols,
which highlight dangerous situations or requiring
caution (see paragraph 1.2).
• The respect of standards and recommendations
shown in this Manual will ensure safe use of the
equipment and appropriate interventions on the
same.
• The “Use and Maintenance Manual” is an integral
part of the equipment: it should therefore be
kept together with the equipment so that it
can be consulted as and when necessary (in a
secure dry place away from sunlight, atmospheric
agents, etc.) throughout the working life of the
equipment, even when the equipment is sold or
finally dismantled.
• It is advised to keep the Manual constantly
updated, integrating any amendments, additions
or modifications made by the Manufacturer.
Any notes or comments should be made on
the blank pages at the rear of the Manual (see
Attachments: Notes).
• Use the Manual in a way that its content is not
damaged.
• Do not remove, tear or write on the Manual for
any reason.
• If the Manual is lost or damaged and therefore
becomes illegible, request a new Manual from
the Manufacturer.
This “Use and Maintenance Manual” is aimed
at operators in order to allow correct use of
the product. The Manual contains all useful
information for declared used of the equipment;
in particular the operator will find instructions and
indications regarding:
• correct installation of the equipment;
• a functional description of the equipment and all
parts;
• commissioning;
• correct programmed maintenance;
• attention to the most elementary safety and
accident-prevention regulations.
This Manual is divided into 9 chapters, each
referring to a specific subject inherent to the entire
equipment.
The attachments are found at the rear of the
manual. They complete the documentation.
1.2 TERMS AND SYMBOLS USED
It is fundamental that maximum attention is
paid to the following symbols and their meaning
because they highlight important information
such as, critical situations, practical advice or
straightforward information.
Consult this page if in doubt regarding the meaning
of the symbol when reading the Manual.
• Any operations carried out without compliance
to instructions or tampering with equipment
parts, which can cause serious injury to persons,
will be highlighted with:
DANGER!
This symbol refers to Safety Standards that
MUST be followed in order to guarantee
your safety and that of others and to
prevent damage to the equipment.
• Critical situations concerning dangerous areas,
situations or operations in which failure to comply
with the instructions may render the warranty
null and void, cause damage to equipment,
connected components or the surrounding area,
are highlighted by the symbol:
ATTENTION!
This symbol refers to Safety Standards that
must be followed carefully in order to
guarantee your safety and that of others
and to prevent damage to the equipment.
• Any operations carried out without compliance
to instructions or tampering with equipment
parts, which can cause damage to the equipment
rendering the warranty null and void, will be
highlighted with:
PROHIBITED!
This symbol calls attention to operations
that are prohibited.
• Any general information and/or useful advice
referring to any subject, will be highlighted with:
NOTE!
This symbol highlights information and/or
useful advice.
CHAPTER 2: GENERAL INFORMATION
2.1 LIABILITY
Failure to comply with the instructions contained
in this Use and maintenance manual relieves the
Manufacturer from any liability.
For any information not included or that cannot
be deduced from the Manual, consult the
Manufacturer directly.