49
2.
Select
OSD
from the
Port Mode
drop-down list and select
Enable OSD Report
. Then OSD data will be
reported to the management platform.
3.
Click
Save
.
Transparent Channel Configuration
Transparent channel is mainly used to achieve transparent data transmission between two devices.
NOTE!
This function is not supported by some models, please see the actual model for details.
Make sure that you have set
Port Mode
to
Trans-Channel
for your camera.
The actual displayed Web interface may vary with the device model.
1.
Click
Setup
>
System
>
Ports & Devices
, and then click the
Trans-Channel
tab.
2.
Select
Enable
for
Trans-Channel
.
3.
Enter the destination IP address and port number (IP address and port number that the transparent
channel connects to).
4.
Click
Save
.