54
Button
Description
Take a snapshot of the current image displayed on the PC.
Note:
The path for saving snapshots is set
in
System Configuration
.
/
Start/stop local recording.
Note:
The path for saving local recordings is set
in
System Configuration.
/
Start/stop audio communication between the PC and the camera.
/
Start/stop digital zoom. For more details, see
Using Digital Zoom
.
/
Start/stop 3D positioning. For more details, see
Using 3D Positioning
.
/
Show/hide the PTZ control panel.
Reset the packet loss rate to zero.
Note:
After you move the mouse cursor on a live view window, this button
appears on the floating toolbar.
Display packet loss rate and bit rate information in the bottom.
Note:
After you move the mouse cursor on a live view window, this button
appears on the floating toolbar.
Click this icon to display the bottom information. Click this icon again,
the bottom information is displayed if the mouse cursor is moved on a
live view window or on the bottom information, and it hides
automatically if the mouse cursor remains on a live view window for 3
seconds or leaves the window.
Click this button to open the image setting page.
Display in full screen mode.
Set the display ratio of the image.
Scale: display images by 16:9
Stretch
:
display images by window size
Original: display images in its original size
Select a live video stream that the camera supports: main stream, sub
stream or third stream.
Viewing Certain Area of Images
Digital zoom and 3D positioning allow you to get more details of certain part of images. Digital zoom
enlarges an image with loss in image quality, while 3D positioning enlarges an image without.