43
4.
Under
HTTPS
, select
Enable
. Uploading a custom SSL certificate is also supported to ensure security.
5.
Click
Save
.
Next time you log in, enter the address in
https://IP:HTTPS port number
format, for example,
https://192.168.0.13:443
, to enter secure channel mode. If HTTPS uses a default port number, enter the
address in
https://IP
directly
.
RTSP Authentication
RTSP (Real Time Streaming Protocol) is an application layer protocol. To transmit and control the audio and
video, set RTSP authentication on the Web interface.
1.
Click
Setup
>
System
>
Security
>
RTSP Authentication
.
2.
Select an authentication mode (basic/digest) and then click
Save
.
Hide Vendor Information
You can set to hide the vendor information of the network camera on the Web interface.
1.
Click
Setup
>
System
>
Security
.
2.
Under
Registration
Info
, select
Enable
.
APR Binding
This function can protect the camera from ARP attacks. When the camera visits an IP of another network
segment via a gateway, it can communicate only with the MAC address binding to the gateway address in
the same segment.
1.
Click
Setup
>
System
>
Security
>
ARP Binding
.
2.
Select the check box to enable the ARP binding function and set the MAC address.
3.
Click
Save
.
IP Address Filtering
You can allow or deny the access from the specified IP address to you camera.
NOTE!
This function is only supported by certain models, please see the actual model for details.
1.
Click
Setup
>
System
>
Security
>
IP Address Filtering
.
2.
Select
Enable
. Select the filtering mode and then enter the desired IP addresses.
3.
Click
Save
.