Low Voltage Servo Drive Manuals
www.zgcmotors.com/
The items of routine inspection are as follows:
Is there any abnormal noise
Is the driver terminal screw loose?
Whether the main circuit terminal has poor contact, and whether the cable connection and screw have
overheating traces
Whether the power cable and control wire are damaged, especially whether the external insulation layer is
cracked or cut
Clean the dust in the printed circuit board and air duct, and take anti-static measures when cleaning
3.4 Storage of drive
The storage environment of the drive shall meet the following requirements:
Environmental
characteristics
requirements
Note
ambient
temperature
-20
℃
—70
℃
The ambient temperature
should be lower during
long-term storage
relative humidity
20%—95%
Storage
environment
No direct sunlight, no dust, no corrosive
combustible gas, no oil mist, steam, dripping,
vibration environment
can use plastic film sealing and
desiccant measures
3.5 Driver warranty
The company will provide warranty service in case of the following conditions:
In normal use, if the driver fails or is damaged, it shall be responsible for the warranty within 12 months from
the date of delivery; if it exceeds 12 months, a reasonable maintenance fee will be charged
Even within the scope of 12-month warranty, a certain maintenance fee shall be charged in case of the
following situations: 1) damage to the drive caused by incorrect operation and use according to the
instructions of the user's manual; 2) damage to the drive caused by incorrect wiring
3) Driver damage caused by fire, flood, abnormal voltage, etc. 4) damage caused by using the driver for
abnormal functions