Installation
~
9
~
4.
Installation
4.1
Location
The
ZeverCom/ZeverCom WiFi
should be installed indoors as extreme
temperatures, immersing in water, fire and strong impacts will damage the
ZeverCom/ZeverCom WiFi
.
To take advantage of the
ZeverCom/ZeverCom WiFi
´s self-powered feature the
maximum length of the RS485 cable between the
ZeverCom/ZeverCom WiFi
and
the inverter is 20m.Should a separate power supply unit be used, the maximum
length is then increased to 1000m.
If the
ZeverCom WiFi
has the WiFi option, the antenna should be assembled as per
Fig. 4-1. Please ensure that the signal strength between the WLAN router and the
ZeverCom WiFi
is strong enough to ensure a reliable wireless connection. Please
refer to section 5.6 for the WiFi setup instructions. If the
ZeverCom WiFi
is
connected to the WLAN router, the yellow WiFi LED will illuminate.
Fig. 4-1: Assemble the antenna
4.2
Installation
The
ZeverCom/ZeverCom WiFi
should be mounted on a wall as follows:
Step1: Select a suitable place for mounting.
Step2: Mark the positions of the drill holes on the wall (spacing of drill holes:
154mm).
Fig. 4-2: Mark the holes
