Zetor Forterra HD 130 Operator'S Manual Download Page 72 | Manualshive

Page: 72 / 168

background image

Hydraulic brakes of trailers

FHD14N064

Connect hydraulic brakes of trailer or articulated trailer to the quick couplings marked by an arrow.

Control of hydraulic brakes of trailers (articulated trailers) and control of tractor brakes is done so that the
braking effect of both vehicles is synchronized. Working pressure is derived by oil supplied by non-switched
on/switched off gear pump of hydraulics. Brake valve of the trailer is done by the pressure of brake fluid from

main braking rollers depending on the force effecting on the brake pedal. The pressure on clutch head must
be 12 - 15 MPa with maximum depression of brake pedal. Brake valve of trailer prefers the function of brakes
to the function of hydraulics. If there are shocks when foot brake pedals are depressed in the pipeline of
hydraulic circuit, it is necessary to bleed the hose from the brake valve to the quick coupling.

When driving with connected trailer or articulated trailer, the pedals of foot brake must be

connected and secured by a valve! When braking with one brake pedal, hydraulic brakes of the trailer
are not active.

Connecting and disconnecting quick couplings of trailer hydraulic brakes

When connecting and disconnecting quick couplings, take increased care with regard for

remaining oil which remains in the socket or in the plug of quick coupling. For ecological reasons, it
is necessary to remove this remaining oil after every disconnection of quick couplings with any
textile material.

Stopping the tractor - manual brake

Stop the tractor slowly under standard conditions. Shortly

before stopping:
1. Depress the clutch pedal.
2. Shift the main gear shifting lever to neutral position.
3. With every stopping, secure the tractor against
spontaneous dead start by manual brake.

F11N026

DRIVING OPERATION

71

71

«
...
70
71
72
73
74
...
»

Summary of Contents for Forterra HD 130









































































































































































Reviews:

No comments

Related manuals for Forterra HD 130

Brand: David Brown Pages: 93

Brand: Land Pride Pages: 36

Brand: Broan Pages: 1

Vario 700 Series

Brand: FENDT Pages: 34

Brand: Echo Pages: 5

Proxima Plus 100

Brand: Zetor Pages: 34

Brand: Victory Pages: 91

Brand: Ditch Witch Pages: 207

Brand: Case Pages: 26

Brand: Bercomac Pages: 20

Brand: Bercomac Pages: 22

Brand: Bercomac Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands