Written by:.JBJ
Checked by: AC
Document Number: Premier MX Inst Rev: 2
Page 39 of 44
14/12/06
•
To set Day/Night Mode Off Time
Press SELECT
↓
, to access day/night OFF Time Set Display:
HH:MM:SS
HH flashing
OFF Time
Press ENABLE (+) or DISABLE (-) to change HH to desired
value (00 to 23)
Press SELECT
↓
, OFF Time Set Display:
HH:MM:SS
MM flashing
OFF Time
Press ENABLE (+) or DISABLE (-) to change MM to desired
value (00 to 59)
Press SELECT
↓
, OFF Time Set Display:
HH:MM:SS
SS flashing
OFF Time
Press ENABLE (+) or DISABLE (-) to change SS to desired
value (00 to 59)
Press SELECT
↓
, to exit back to Delay On/Off Set Display:
D/N ON
or
D/N OFF
Change?
Change?
Pressing SELECT
↓
repeats the cursor/display changes as
above.
Pressing SELECT
↑
repeats the cursor/display changes as
above in reverse.
•
To exit Clock Module menu:
Return WP DIL switch on TIMER MODULE to OFF position.
Press SELECT ON/OFF: Module switches off the LCD
Backlight and exits configuration mode, Normal Time Display:
HH:MM:SS
or
HH:MM:SS
D/N ON
D/N OFF
On completion of editing, return the Access Control keyswitch
to position 0.
16.2
Configuring the Clock Module.
The Clock Module is configured by setting Link 1 and DIL switch 1, both located on
the rear of the C1651 Clock Module PCB [accessed by opening the panel door].
