English - 31
IG v1.0.0 01.2022
© 2022 ZES - All rights reserved
Figure.26
Figure.27
10.5.7.2 - OCPP SETTINGS
For OCPP connection mode, select OCPP Connection as “Enabled”
If you select mode as “Enabled”; you should type all fields in the OCPP Settings menus as explained
below.
For now, the only available OCPP version is OCPP 1.6, so it will be selected as default.
If you select OCPP Connection as “Enabled” you can select authorization modes explained below.
Traditional OCPP: Behaves as stated in the OCPP Specification.
Authorize with Fixed IdTag: This mode authorizes automatically (without IdTag). The preset IdTag
is used for notifying the server related to transactions.
Authorize All: Requires an IdTag to be presented, however does not check its integrity; it accepts
all IdTags. Does not send the authorization, start and stop requests to the server. Does not permit
the server to change related OCPP Configurations.
Authorize with Whitelist: Only accepts the IdTags that are preset; rejects others. Does not send
authorization, start and stop requests to the server. Does not permit the server to change related
OCPP Configurations.
If you select OCPP Connection as “Disabled” you can select authorization modes explained below.
Authorize All: Requires an IdTag to be presented, however does not check its integrity; it accepts
all IdTags.
Authorize with Whitelist: Only accepts the IdTags that are preset; rejects others.
