![ZES EVC03 Series Installation Manuallines Download Page 4](http://html1.mh-extra.com/html/zes/evc03-series/evc03-series_installation-manuallines_3509465004.webp)
English - 3
IG v1.0.0 01.2022
© 2022 ZES - All rights reserved
•
Charging Station bottom must be at (or above) the ground level.
•
Adaptors or conversion adapters are not allowed to be used. Cable extension sets are not
allowed to be used.
•
The allowed current value of the service socket is maximum 10A.
WARNING:
Never let people (including children) with reduced physical, sensory or men-
tal capabilities or lack of experience and or knowledge use electrical devices unsupervised.
CAUTION:
This vehicle charger unit is intended only for charging electric vehicles not
requiring ventilation during charging.
1.2 - GROUND CONNECTION WARNINGS
•
Charging station must be connected to a centrally grounded system. The ground conductor
entering the charging station must be connected to the equipment grounding lug inside the
charger. This should be run with circuit conductors and connected to the equipment grounding
bar or lead on the charging station. Connections to the charging station are the responsibility
of the installer and purchaser.
•
To reduce the risk of electrical shock, connect only to properly grounded outlets.
•
WARNING : Make sure that during installing and using, the charging station is constantly
and properly grounded.
1.3 - POWER CABLES, PLUGS and CHARGING CABLE WARNINGS
•
Be sure that plugs and sockets are compatible on charging station side.
•
A damaged charging cable can cause fire or give you an electric shock. Do not use this product
if the flexible Charging cable or vehicle cable is frayed, has broken insulation, or shows any
other signs of damage.
•
Ensure that the charge cable is well positioned thus; it will not be stepped on, tripped over,
or subjected to damage or stress.
•
Do not forcefully pull the charge cable or damage it with sharp objects.
•
Never touch the power cable/plug or vehicle cable with wet hands as this could cause a short
circuit or electric shock.
•
To avoid a risk of fire or electric shock, do not use this device with an extension cable. If the
mains cable or vehicle cable is damaged it must be replaced by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
•
Use appropriate protection when connecting to the main power distribution cable.