Zeroplus Arduino starter kit with Logic Analyzer, Manual

Page: 37 / 123

36
bars, displayed in sample point or seconds depending on the unit you
chose to display. This distance is the duration of the artifact that
we want to filter. In the Noise Filter dialog box select the bus, click
on the right arrow and enter the duration you measured. Verify that
the transitional values have disappeared.
Step 4:
• Connect the logic analyzer to the Arduino UNO as shown on the
diagram.
• Connect the pin CLK of the logic analyzer to the pin 2 of the
Arduino UNO.
Logic Analyzer A0 A1 A2 A3 A4 A5 A6 A7 clk
Arduino UNO 8 9 10 2
PROCEDURE