Zeroplus Arduino starter kit with Logic Analyzer, Manual

Page: 103 / 123

102
• Connect your keyboard, your computer and the Logic Educator as
shown on the previous page.
• Connect the channel A0 of the logic analyzer to the pin D+ and
the channel A1 to D- as shown below.
• In ZP Studio, set the sample rate at 10MHz, the memory at 32kb
and click on the compression icon.
• Click on Run and quickly write something as you will have a
short window of time before the buffer becomes full.
• Add the protocol decoder USB 1.1
• Right click on the bus and select Bus/Protocol Analyzer
Property. In the dialog box that popped up, choose Low and
click on Ok.
PROCEDURE
Logic Analyzer A0 A1 A2 A3 A4 A5 A6 A7 clk
Arduino UNO D- D+
PROCEDURE