Zero88 Jester Operating Manual Download Page 52 | Manualshive

Page: 52 / 65

Zero88 Jester Operating Manual Download Page 52

JesterML Operating Manual

Glossary

52 of 65

73-406-00 Issue 1.0

IEC320-C14

The type of mains input connector on the inline

PSU

, sometimes shortened to simply

IEC

, or referred to as a kettle plug.

.IFT

The file extension used by Zero 88 for fixture personality information. The format of
the data is not published, and is only compatible with PC applications supplied by
Zero 88.

Insert Button

The button on the JesterML which is used to add a memory between two scenes, or
to add another step to a chase.

Intensity

How bright a light is. Also known as

Brightness

or

Dimmer

. On the JesterML,

fixture intensities are controlled by the wheels when FIXTURES is selected.

Isolated

The DMX512-A input port on the back of the JesterML is opto-isolated. Conversely,
the DMX512-A output port on the back of the JesterML is

not

isolated. This is the

preferred grounding topology of the DMX512-A standard.

Jack

The connector used for the Audio In and Remote connectors on the JesterML. The
Jack used is the ¼ inch, stereo variety.

JesterML(24)

The lighting control desk.

.JML

The file extension that the JesterML uses for storing show data. The format of the
data is not published, and the data is not compatible with any PC applications.

.JOS

The file extension that the JesterML uses for software upgrade files. The format of
the data is not published, and the data is not compatible with any PC applications.

Key

Another name for a

Button

.

Law

The curve of the dimmer, which is normally set on the dimmer itself. The JesterML
does not allow you to control the fade law.

LCD

Liquid Crystal Display – the JesterML has four of these. The area above the
PROGRAM/GO button is the Main LCD and displays basic cue information. The
area above the wheels is the Wheel LCD and displays the names and values of the

«
...
50
51
52
53
54
...
»

Summary of Contents for Jester


































































Reviews:

No comments