BNP
®
65 and 220 SUCTION BLAST CABINETS
Page 30
© 2019 CLEMCO INDUSTRIES CORP.
www.clemcoindustries.com
Manual No. 21309, Rev. J 01/19
9.0
ACCESSORIES AND REPLACEMENT PARTS
9.1
Optional Accessories
Turntables and Turntables with Tracks
WARNING
Turntable capacities are based on concentric
loading. Use solid fixturing to hold heavy parts
in place. Do not remove lift equipment until the
part is adequately supported to prevent
movement. Moving or rotating heavy,
unsupported or off-centered parts may cause
them to shift or topple, and cause severe injury.
Fixed-Base Turntable Without Bearing
Description
Stock No.
20" dia. 25 lb capacity ............................................ 12412
Fixed-Base Turntable with Bearing, 500 lb
Capacity ‒ Figure 31
Item Description
Stock No.
(-)
20" dia. assembly, 500 lb capacity ............ 12411
(-)
30" dia., assembly 500 lb capacity ............ 14138
1.
Turntable, replacement
20" diameter 500 lb capacity .................. 18329
30" diameter 500 lb capacity .................. 21390
2.
Bearing, 1-1/2" bore .................................. 11517
3.
Protector, bearing ...................................... 13479
4.
Screw, 1/2-NC x 1-1/2" cap ....................... 03454
5.
Washer, 1/2" lock ...................................... 03516
6.
Nut, 1/2-NC hex ......................................... 03511
Figure 31
Turntable with Workcar and Track, 500 lb Capacity
Figure 32
Item
Description
Stock No.
(-)
20" dia. turntable and track assembly
for 65 series ........................................... 13530
for 220 series ......................................... 12835
(-)
30" turntable and track assembly
for 220 series ......................................... 24045
(-)
Turntable & workcar assembly, replacement
Items shown in Figure 32, less track
20" diameter ........................................... 24205
30" diameter ........................................... 24086
1.
Turntable, replacement
20" diameter ........................................... 18329
30" diameter ........................................... 21390
2.
Bearing, 1-1/2" bore .................................. 11517
3.
Protector, bearing ..................................... 13479
4.
Screw, 1/2-NC x 1-1/2" cap ...................... 03454
5.
Washer, 1/2" lock ...................................... 03516
6.
Nut, 1/2-NC hex ........................................ 03511
7.
Caster, 4" V groove ................................... 11594
All other track items are special order. Contact
distributor for price and availability.
Figure 32
Turntable top design varies with turntable size.
1
6
5
4
2
3
Turntable top design varies with turntable size.
2
1
3
7
6
5
4
