45
9.0 FIRMWARE VERSION
To check the current
FIRMWARE
of your ZX-40, follow the below steps:
1.
If you are currently in
VIDEO MODE
and
RECORDING
, you
will need to press the
SHOOT/RECORD BUTTON
to end the
recording first.
2.
PRESS
the
BUTTON
on the bottom right of the back screen,
this will open up the settings menu. A pop up with two locks and
arrows may appear. Swipe from left to right. You may need to
PRESS
the
BUTTON
again.
3.
PRESS
the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4.
Scroll down the list by swiping from bottom to top until you reach
FIRMWARE VERSION
.
PRESS
on this option.
5.
To exit,
PRESS
the
ON/OFF BUTTON
once, and then
PRESS
the
back button on the screen. This will take you back to the camera’s
shoot mode.
NOTE:
To check if there is a new firmware version is available for your action camera, or
for instructions on how to update it’s firmware, please check for updates on our
website. www.zero-x.com.au | www.zero-x.co.nz
