23
6.14 SCREEN SAVER
Record videos and conserve power with the screen saver function,
allowing the LCD display to turn OFF while the ZX-40 continues to
record. There are four options to choose from for the screen saver
function activating:
30 SECONDS, 1 MINUTE, 2 MINUTES
and
OFF
.
The ZX-40 default setting is set to
30 SECONDS
. To change the this
setting, follow the below steps:
1.
If you are currently in
VIDEO MODE
and
RECORDING
, you
will need to press the
SHOOT/RECORD BUTTON
to end the
recording first.
2.
PRESS
the
BUTTON
on the bottom right of the back screen,
this will open up the
SETTINGS MENU
. A pop up with two locks
and arrows may appear. Swipe from left to right. You may need to
PRESS
the
BUTTON
again.
3.
PRESS
the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4.
Scroll down the list by swiping from bottom to top until you reach
SCREEN SAVER
.
PRESS
on this option. The
SCREEN SAVER
SETTINGS
screen will pop up.
5.
You can scroll through the options by swiping
UP
and
DOWN
on
the screen.
PRESS
on the option that you prefer. The setting will
now be updated.
