22
6.13 DVR MODE
When the
DVR MODE
is activated, the ZX-40 will continue to record
until the unit has run out of power. The ZX-40 default setting is
OFF
. To
change this setting, follow the below steps:
1.
If you are currently in
VIDEO MODE
and
RECORDING
, you
will need to press the
SHOOT/RECORD BUTTON
to end the
recording first.
2.
PRESS
the
BUTTON
on the bottom right of the back screen,
this will open up the
SETTINGS MENU
. A pop up with two locks
and arrows may appear. Swipe from left to right. You may need to
PRESS
the
BUTTON
again.
3.
PRESS
the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4.
Scroll down the list by swiping from bottom to top until you reach
DVR MODE
. You will notice there is a small box with
TURN OFF
next to it.
PRESS
the box to activate this function. It will now say
TURN ON
.
