background image

Limited Warranty Information

9.4

described in this Owner's Manual, in accordance with 
local regulations.

“Proper use” also means charging the Power Pack after 
each use and storing it in a fully charged state, or 
recharging it every 30 days, or keeping it on the 
charger when in storage or not in regular use.

In addition, this Limited Warranty does not cover:

The cost of parts and labor involved in any routine care 
and maintenance and/or the replacement of parts due 
to normal wear and tear, use, or deterioration, including 
but not limited to: tires, brake pads and rotors, belt 
drive, fork seals, grips, foot pegs, and the seat;

This warranty does not cover the tires installed on the 
2016 Zero motorcycle. The original equipment tires are 
warranted separately by the tire manufacturer.

The replacement of fluids, unless their replacement is a 
necessary part of warranty service on a covered 
component;

Wheels on off-road bikes once they have been ridden;

Any cosmetic concerns that arise as a result of 
environmental conditions, owner abuse, misuse, lack of 
routine care and maintenance, and/or improper use;

Parts or components damaged by use or operation 
under abnormal circumstances or contrary to the 
requirements described in this Owner's Manual.

Zero motorcycles and Power Packs used for racing or 
other competitive events;

Zero motorcycles and Power Packs misused or 
improperly operated; 

Damage, malfunctions, or performance problems 
caused by modifications or alterations to 

2016 Zero 

motorcycles and/or Power Packs - including 
modifications or alterations performed by an authorized 
Zero dealer - that cause the Zero motorcycle or Power 
Pack to fail;

Damage, malfunctions, or performance problems 
caused by aftermarket accessories installed on a 2016 
Zero motorcycle or Power Pack after the “in service 
date,” or caused by aftermarket accessories installed 
by someone other than an authorized Zero dealer;

Damage, malfunctions, or performance problems 
caused by the improper repair of the motorcycle, 
installation of any parts or accessories not sold or 
approved by Zero, the installation and use of any 
parties or accessories that alter the motorcycle’s 
specifications from those set by Zero, or the use of new 
or used parts not approved by Zero;

Damage, malfunctions, or performance problems 
caused by fire, collision, accident, or improper storage;

Damage, malfunctions, or performance problems 
caused by continued operation of the motorcycle after a 

Zero Owner's Manual (S and DS).book  Page 4  Friday, October 30, 2015  11:13 AM

Summary of Contents for 2016 ZERO DSR



















































































































































Reviews: