background image

Limited Warranty Information

9.3

Up to five (5) years and 90 days or 100,000 miles 
(160,000 km), whichever occurs first, from the 
“shipment date” of the host 2016 Zero S/SR/DS/DSR 
motorcycle for the Z-Force® Power Tank accessory. If 
purchased after the host Power Pack warranty has 
expired, the Power Tank will receive the standard 
warranty of one (1) year from date of purchase.

Five (5) years and 90 days or 100,000 miles (160,000 
km), whichever occurs first, from the “shipment date” 
for the ZF9.8 and ZF13.0 Z-Force® Li-Ion Power Packs 
on the Zero S/SR/DS/DSR motorcycle.

The Power Pack's outer case is not covered under the 
Power Pack Limited Warranty duration terms above. 
Instead, the Power Pack’s outer case is covered for a 
period of two (2) years and 90 days from its “shipment 
date.”

What Is Not Covered By This Limited 
Warranty?

Due to the battery chemistry, there is a normal, expected 
reduction in range/capacity that Power Packs can yield 
over time and usage. Depending on use and storage 
conditions, Power Packs will degrade during the duration 
of this Limited Warranty period. Zero will only repair or 
replace pursuant to this Limited Warranty a Power Pack 
that exhibits a nominal storage capacity reduction of 
greater than 20% of the published nominal capacity, as 
measured by an authorized Zero dealer. To check the 
capacity of a Power Pack, an authorized Zero dealer can 
perform a battery management system log data extraction, 
which will confirm if a reduction is within expected norms.

Further, this Limited Warranty only 

covers 2016 Zero 

motorcycles or Power Packs/Power Tanks that are 
operated according to “proper use” and “under normal 
operating conditions.” For purposes of this exclusion, the 
following definitions apply:

“Normal operating conditions” require routine care and 
maintenance of the 

2016 Zero 

motorcycle and Power 

Packs as described in this Owner's Manual.

“Proper use” means only the use of a motorcycle in the 
manner intended for a rider and passenger on a 

2016 

Zero motorcycle 

with proper safety equipment as 

Zero Owner's Manual (S and DS).book  Page 3  Friday, October 30, 2015  11:13 AM

Summary of Contents for 2016 ZERO DSR



















































































































































Reviews: