Zero Motorcycles 2016 ZERO DSR, Owner'S Manual

Page: 32 / 146

Controls and Components
3.12
Dash Settings
The displays on the dash can be customized to your
personal preferences by using the
ADJ (Adjust) and SEL
(Select) buttons.
A. Adjust Button (ADJ)
By momentarily pressing or holding the ADJ button
you can reset fields and toggle through the trip menus
and display options.
B. Select Button (SEL)
By momentarily pressing or holding the SEL button
you can reset or select fields in Display A and Display
B, change the time, and change the display units.
Note: Once a feature is selected, it will stop flashing after
15 seconds if no further button press is detected, and the
dash will return to its normal operating mode.
Displays A&B
Display A
To select Display A with the dash in its normal operating
mode, momentarily press the
SEL button once. Press the
ADJ button to toggle through the following fields:
•
Trip 1 Odometer - Displays individual trip mileage and
is reset by pressing and holding the
ADJ button for 2
seconds.
Note: Trip 1 is reset each time the battery is recharged
to 100%.
•
Range - Displays remaining battery power based on
learned riding style and usage.
•
Error - Displays 2-digit error codes for dealer use. See
“Dash Error Codes”, on page 7-5
•
RPM - Displays motor RPM.
Zero Owner's Manual (S and DS).book Page 12 Friday, October 30, 2015 11:13 AM