background image

3

4

Grounding Instruction

Replace fuse

When the fuse is burned out, please turn off the switch and

unplug the power. Opening the lid covered the fuse which is

located in the switch box. Using a same size fuse to replace

the old one, then cover the lid. Or you can find a electrician

to replace the fuse.

Earth wire is allowed

to near these place

Gas pipe: probably cause explosion or fire.
Phone wire and lightning rod: probably cause electric shock
and fire when thundering.
Water pipe: earth wire is useless where there are plastics

Caution

Please operate the chair in a flat or level place.

Position the chair 40cm from the wall to allow for
sufficient space to recline up and down.

The maximum suggested operating time is 20mins. 5mins
for each position beginning with the slight-step massage.
A long continuous massage in the same position may cause
an uncomfortable feeling

Before sitting on the chair to avoid injury please inspect
everything to confirm that the massage heads are in the
correct position.

Please make sure that the power switch is at the

OFF

position before inserting the plug into the socket.

Turn off all controls before removing plug from outlet.

Make sure the plug completely insert into the socket

Checking whether any damage on wire no water, rubbish
on wire.

Installing earth wire in correct way. The plug must be
inserted into socket with earth connect.
The earth connect couldn't be
bendor cut off.

Don't press with hands or step on the massage heads
with feet.

Don't put hands between the working massage heads.

Don't put hands or feet in the gap of mechanical parts.

Don't drop or embed anything into the slot of massage chair.

Don't stand or sit or put anything on the backrest, armrest
or leg-rest.
Don't stand on the chair during operation.

Don't move the chair during operation.

Don't pull out the plug or turn off the power during operation.

Don't put your hands or head between leg-rest when in
reclining position.

Don't use the massage chair while wearing hair curlers.

Don't sit or press on the backrest when the chair is in
reclining position.

Don't massage on exposed skin or with thin clothes. It may
cause skin ache.

Keep the chair away from heat, wet, sharp things and
corrosive, inflammable, explosive environment.

To use electric blanket or other heating products on the
chair is forbidden

Keep chair away from stove or other warming products.

Don't put the chair under the sun or other high temper-
ature place.

Don't use the chair outside.

To avoid fade, discolor on uphol-
stery or hardened, deterioratedon
PU.

To avoid accidents or injury

To avoid electric shock when
any leakage or damage.

To reduce short circuits and any
fire hazard.

To avoid the accident when turn
on the power

To avoid accidental injury

Too long time massage is bad for

your body.

To make sure the back lying.

To avoid sudden falling.

Please don't use or store the chair in the wet environment like near
the swimming pool, or bathroom.
Keep the chair and remote control dry all the time
Don't use the chair when your body is wet.

Make sure to install the earth wire in correct way
(Incorrect install way may cause electric shock. If you don't know

how to install, please find a professional electrician)
Don't use plug adapter
(If the enclosed plugdoesn'tmatch with socket,please don'tchange

theplug byyourselfand find a professional electriciantoinstalla

matched socket. )

Unplug the power before cleaning the chair.

Unplug the power after using the chair.

Unplug the power when any damage on the power.

Hold the plug to unplug the power but not try to pull the wire to
unplug the power.

Please turn off the power switch and unplug thepower after massaging.

Unplug the power immediately when electricity goes off.

To avoid damage or accidents
when power goes back.

To avoid accidents

To avoid electric shock or fire

harzard.

To avoid electric shock.

To avoid leakage or electric
shock.

Safety Instruction

Safety Instruction

Caution

P

re

p

ar

at

io

n

P

re

p

ar

at

io

n

The chair is equipped with a cord having an grounding conductor.

The plug must be plugged into an appropriate socket that is properly

installed and matched with the plug.

Summary of Contents for RK7801
















Reviews: