1
3
3
2
21
22
b
a
1
2
4
5
Tender and 3D massage
Operating manual and features instruction
On/off
Switch
Step 1. Turn on power
(1) A hole is for remote control plug.
(2) B hole is for one end of power
(3) Inserting the power plug into outlet.
(4) Turn on the switch which located in the power
box, then the remote control enter standby
status and shows
”
==
”
. If you don
’
t press
“
on/off
”
key in 2mins,the chair enters low power cons-
umption status, but you can still press
“
on/off
”
.
Then the chair is in stand by status.
5) Press
“
on/off
”
key in remote control.
Step 2. Massage
Choosing massage program by the remote control.
About the detail about remote control, please refer to
“
”
.
Time up and the chair stops working, but the chair
stays current position and remote control show
“
==
”
,
the standby status. If you don
’
t press any key in
2mins, there is no image on remote control and chair
is in low power consumption.
How to use remote control
On/off
Step 3. turn off power
(1) Press
“
on/off
”
key in remote control to turn off
the chair, then the chair restored automatically.
(2) After the restoration, turn off the power switch
in power box.
(3) Unplug the power from outlet.
Warning
(1) Before using chair, lifting the pillow, back
cushion to make sure there isn
’
t any
damage on upholstery of back and other
parts. If any damage(no matter how tiny it
is)please stop using chair and unplug the
power to have it repaired.
(2) Make sure the outlet is matched with the
plug which enclosed with the chair.
Caution
(1) Before sitting on the chair, checking
every gaps of the chair to find is there
any eyewinker in them.
(2) Make sure the chair is in original position
and then sit down.
(3) Don
’
t stand on the chair during working
period.
Operating manual and features instruction
Feature instruction
How to recline the back
Pressing the recline key in
remote control as picture,
the back goes down and
leggoes up. Loosing
thekey, the back andleg
stop reclining and stay
in currentposition.
Leg mechanism stretch out
(Leg mechanism can be stretched in 20cm)
When you enjoy your massage, according
to your height and taste, you can make the
leg mechanism stretch out by your feet.
Just thrust Forward and the leg
mechanism will find
the best position
for you.
How to restore the back
Pressing the recline key in
remote control as picture,
the back goes up and leg
goes down. Loosing the
key, the back and leg
stopreclining and stay
in current position
How to make the leg go up
Pressing the recline key in
remote control as picture,
the leg goes up. Loosing
the key, the leg stops and
stays in current position.
How to restore the leg
Pressing the recline
key in remote control
as picture, the leg goes
down. Loosing the key,
the leg stops and stays
in current position.
Air pressure massage on arms
Open the arm cover and put
you hands in. Press
“
auto
”
key in remote control
or
the
“
arm
”
key inside the
cover of remote control to
realize massage on hands.
It effect massage on
left
and right hands in turn.
(1) Opening the cover in remote control to choose
massage part, massage intensity and massage
with.
(2) Pressing 3D+ or 3D-
to adjust 3D massage
machine stretch level.
(1) Confirming no people, pets or things in the back and leg reclining area to avoid any injury or
property loss.
(2) Pay attention to your hands when you recline the back, don
’
t hurt your hands by the gap
between back and arms.
(3) For the detailed operating method, please refer to remote control instruction part.
On/off
Op
era
tion
Op
era
tion
On/off
Timing
Mechanical
Massage
Pressure
Massage
ZERO-G
Stop
Shoulder
Waist
Intensity
Fatigue
recovery
Pain
relieving
Comfortable
mood
Demo
Auto
Custom
Returning...Body detecting...
Overall
Shoulder
Back
Waist
Point
Width
Speed
3D
Strength Volume
