Remove the battery cover and insert the CR123A
battery provided into the Door Window Sensor
according to the correct terminals. Blue LED will
be blinking when the sensor is initialising.
Replace the battery cover when LED stops
blinking.
Step 1
Use the wider double-sided adhesive tape to
attach the transmitter to the edge of the door or
window.
Position the magnet on the door or window frame
so that the LED is off when the door or window is
closed, and red when the door or window is open.
The distance between the transmitter and magnet
should not exceed 15mm.
Step 2
Step 3
Installation Steps
+
_
15mm
15mm
