Use the smaller double-sided adhesive
tape to attach the magnet at the position
determined in step 3.
Step 4
Refer to the Zernet User Manual to pair the installed Door Window Sensor
to your Zernet Controller.
Rev 1.4 www.zernet.com
Copyright © Zernet Ltd 2019. All rights reserved.
Zernet
®
is a registered trademark of Zernet Ltd. All other trademarks are
the property of their respective owners. The information in this document
is subject to change without notice. Zernet assumes no responsibility for
any errors that may appear in this document.
For warranty information please go to www.zernet.com/warranty
CIDF19000180
