6
INSTALLING THE SHELVES:
1. Open the door completely.
2. Push the shelf tracks a
ĸ
xed to the walls of the inner cabinet to the rear of the unit so that the tracks are
fully seated inside the cooler compartment.
3. Line up the rails
Ăĸdž
ed to the shelf with the corresponding wine cooler tracks
ĂƩĂĐŚĞĚ
to the inner
cabinet walls.
4. Push the front of the shelf inwards evenly
ƵŶƟů
the shelf rests fully inside of the unit and you are able to
close the door.
5. The shelf should glide smoothly back and forth. If it does not, you may need to remove it and start over.
REMOVING THE SHELVES:
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf towards yourself
ƵŶƟů
it is fully extended outward.
4. The shelf has
ƉůĂƐƟĐ
posts on both sides as indicated in the diagram below. While facing the unit, press
the
ƉůĂƐƟĐ
post on the right side down while pulling up on the le
Ō
plas
Ɵ
c post. You may choose to do this
by hand or by using a
ŇĂƚŚ
ead screwdriver.
5. Evenly pull out the shelf from the track
ƵŶƟů
it is completely removed from the inner compartment.
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their tracks.
Note: The cooler may experience decreased cooling e
ĸ
ciency if air
ŇŽǁ
is restricted
due to a fully
loaded cabinet.
