10
Preparing Your Wine Cooler for Storage
If the wine cooler will not be used for a long
Ɵ
me, or is to be moved to another place, it will be
necessary to defrost the unit and dry the interior.
1. Disconnect the cooler from the power supply by removing the power plug from the wall socket.
2. Leave the door open to allow for air circula
ƟŽŶ
and to prevent mold, mildew, and unpleasant smells.
3. Once the interior is dry and clean the unit will be ready for storage.
dƌŽƵďůĞƐŚŽŽƟŶŐ
ISSUE POSSIBLE
CAUSE
SOLUTION
The wine cooler turns on
and o
ī
frequently.
The room temperature is higher
than the recommended ambient
environment.
Run the cooler at the
appropriate ambient
temperature.
The door is being opened
ŽŌĞŶ͘
Minimize the number of
Ɵ
mes the
door is opened.
The door is not completely closed. Make sure the door is completely
closed.
The door gasket is not sealing
properly.
Make sure the door gasket is
properly sealed.
The cooler does not have the
suggested
ǀĞŶƟůĂƟŽŶ͘
Read and follow the
͞/ŶƐƚĂůůĂƟŽŶ
Clearance Requirements”
ƐĞĐƟŽŶ͘
The wine cooler does
not turn on.
There is a power failure.
Ensure the cooler is plugged
in and the outlet has power.
The cooler is not plugged in.
Plug the unit in to a power outlet
that has
ƐƵĸĐŝ
ent amperage.
A house fuse has blown or the
circuit breaker is tripped.
Replace the broken fuse in your
fuse box or reset the breaker.
Important: Do NOT touch the power plug when your hands are wet. NEVER unplug the unit by pulling the
plug.
ĂƵƟŽŶ͗
Store the unit out of the reach of children. If you have children, you may want to take
ĂĚĚŝƟŽŶĂů
ƉƌĞĐĂƵƟŽŶƐ
such as removing the door to prevent a child from being trapped inside the cooler.
^ĞĞKƉĞƌĂƟŽŶƉĂŐĞĂŶĚǀĞƌŝĨLJ
Sabbath mode is disabled.
Sabbath mode may be enabled.
