8
batteries can leak chemicals then damage the electronic
parts.
e. Immediately replace run-down batteries with new ones.
f. Check the batteries periodically and replace them when
necessary.
Program Date and Time
1. Continuously press TIME button for 2 seconds until
“
2009
” shown on the screen and starts to flash.
2. Press MEMO/
▲
button or SCAN/
▼
button to set the
number representing the Year.
(You can press and hold MEMO/
▲
or SCAN/
▼
buttons
for about 2 seconds, the number of the Year will be
displayed in the faster speed.)
3. Press TIME button to confirm the Year setting. Then the
number representing the Date will flash.
4. In the same manner, set the Month, Date, Hour and
Minute.
Note: After replacing batteries, always check the Date/Time
is properly set or not first, then use the blood pressure
monitor. If the batteries are removed for more than
40
seconds, you must reset the Date/Time.
How to Apply the Arm Cuff
1. Insert the air plug of the arm cuff into the air jack of the
blood pressure monitor.
2. The cuff should be assembled correctly when it is
removed from the box. If it is not, pass the end of the
cuff furthest from the tubing through the metal D-ring to
form a loop. The smooth cloth should be on the inside of
the cuff loop.
3. If the cuff is assembled correctly, the sewn hook
