12
While starting the unit each time, it will give a voice
prompt. If you don’t need, please off the announcement.
How to Use the Memory Features
The blood pressure and pulse measured and displayed are
automatically stored in the memory. The blood pressure
monitor can store up to 80 measurements. If more than 80
measurements have been taken, the earliest measurement
will be erased and replaced by the most recent
measurement.
1. Review the Average Value and previously
measurements:
Press MEMO/
▲
button, the unit first display the average
values of Systolic, Diastolic and Pulse. (Averaged from
all memorized readings.) Press MEMO/
▲
button again
to review the measurement from the latest to the earlies.
The latest measurement (M 01) appears when you
press MEMO/
▲
button. M 01 is the latest reading
measured. The Systolic, Diastolic, Pulse and Date/Time
of the measurement will be displayed. Press MEMO/
▲
button to repeatedly review other memorized readings.
The readings will be displayed as M 02, M 03, M 04 …
etc. You can press SCAN/
▼
button to switch to the
automatic display mode.
2. Scan all previous measurements:
Press SCAN/
▼
button, the unit will display all
measurements one by one in one in one second interval.
In the automatic display mode, You can press MEMO/
▲
button to switch to the single display mode.
