Zephyr HORIZON DHZ-M90AMWX, Installation Instructions Manual

Page: 20 / 60

3. Lift the hood onto the screws
and adjust to make sure the
hood is level.
4. When the hood has been
adjusted tighten the screws
to secure the hood in place.
NOTE: Screws must be fastened into wooden studs so wood blocking may be
necessary. If using wall anchors make sure to check your local codes for suita-
bility and type of anchors to use.
NOTE1 : For the various installations use screws and screw anchors suited to the
type of wall (minimum screw size: 1/4" diameter x 2-3/4" length).
NOTE2 : The following Duct Cover kit is available as acessory: Z1C-01HZ.
- 20 -