Zephyr AK7048BS, Use, Care And Installation Manual

Page: 15 / 60

13
1. Disconnect blower plug.
5HPRYHVFUHZVDWWRSRIKRRGERG\DWWDFKLQJ
blower to single blower plate. Remove blower
from hood body.
5HPRYHVFUHZVIURPLQVLGHKRRGERG\
attaching single blower plate. Remove single
blower plate from hood body.
,QVWDOOGXDOEORZHUSODWHIURP3%'$NLW
LQWRKRRGERG\$WWDFKE\VFUHZVSUHYLRXVO\
removed from step 3.
Installation –
PBD-1200A
Dual Blower
This range hood is equipped standard with a single blower vertical duct option. To convert from single blower
vertical ducting to dual blower vertical ducting please following the instructions below.
PBD-1200A dual blower kit compatible only with AK7036BS, AK7042BS and AK7048BS models.
5. Install previously removed blower onto one side
RIGXDOEORZHUSODWHDQGDWWDFKE\SUHYLRXVO\
removed screws from step 2.
,QVWDOOEORZHUIURP3%'$NLWRQWRRWKHU
VLGHRIGXDOEORZHUSODWHE\[
screws.