Zephyr AK7048BS, Use, Care And Installation Manual

Page: 13 / 60

11
This range hood is equipped standard with a 8” round vertical duct option. To convert from 8” round vertical to 8”
round horizontal ducting or 3-1/4” x 10” rectangular horizontal ducting please following the instructions below.
NOTE: Horizontal ducting is only available for the single internal blower.
127(,IKRUL]RQWDOO\GXFWLQJYLD´[´UHFWDQJXODUGXFWLQJWKHPD[LPXPDLUÀRZRI&)0ZLOO
EHUHGXFHGWR&)02WKHU&)0OHYHOVZLOOQRWEHDႇHFWHG
VERTICAL TO HORIZONTAL DUCTING CONVERSION
1. Disconnect blower plug.
5HPRYHVFUHZVDWWRSRIKRRGERG\DWWDFKLQJ
blower to blower plate. Remove blower from
interior of hood body.
5HPRYHVFUHZVIURPLQWHULRURIKRRGERG\
attaching blower plate to hood body. Remove
blower plate.
.QRFNRXWUHDUSODWHV$ %IRU´URXQG
rear ducting or plate B only for 3 1/4” x 10”
rectangular rear ducting.
A
B
Installation –
Horizontal Conversion