NETWORK SETTINGS
HOW TO CONFIGURE EACH INTERFACE
The M2-MVB contains a Mobile, Wifi and two Ethernet connections. Each network can be used to
stream video to the Zepcam Video Server.
NETWORK CONNECTION
To Change the Mobile Network settings go on the onboard webpage to:
Network -> Mobile
The steps to setup the M2-MVB to connect to a Mobile network are:
1. Insert a Simcard with databundle Fig 4.1
Fig 4.1 Insert sim card
2. If the Simcard is PIN locked go to
Network -> Mobile -> Advanced
. Enter the valid PIN
code in the PIN code input field and press try pincode.
3. The Mobile Status button on the bottom of the screen should stop reporting PIN locked.
Enter the right APN settings. Go to
Network -> Mobile -> APN settings
. You can use the
quick setting pulldown list.
4. (Optional) You can enter the APN settings (APN server, APN login and APN Password)
manually when your SIM data is not available in the APN quick settings list.
5. There are a few advanced settings available for the Mobile network. These can be found in
the page
Network -> Mobile -> Advanced
. The advanced settings are:
●
Roaming:
Enable this setting for using the M2-MVB in a foreign country
●
Manual Network selection:
Enter here the MMC MNC code for a specific
network.
●
Networks:
Select here to use 2G, 3G and/or 4G networks.
More information and FAQ on:
www.zepcam.com/support
16
Summary of Contents for Mobile Video Box M2
Page 1: ......
