CAMERA SETTINGS
SETUP AND SPECIFICITIES
To setup an IP camera on the M2-MVB you need to go to:
System -> Network Cameras
(
see Fig 3.1 )
Fig 3.1 Camera setting
The most imported setting to make a M2-MVB work with an IP camera is the rtsp URL. Each IP
camera manufacturer uses it’s own rtsp URL. You can always check the web page or user manual
from a IP camera manufacturer to get the right rtsp URL. For a complete overview of supported
cameras check Appendix A.
Here is a short table with a few example rtsp URLs for a few manufactures:
Manufacturer
Rtsp URL
Axis
rtps://[username]:[password]@[ip address]/axis-media/media.amp
Soar
rtps://[username]:[password]@[ip address]
Sony Ipela
rtps://[username]:[password]@[ip address]/media/video1
Panasonic
rtsp://[username]:[password]@[ip address]/Src/MediaInput/h264/stream_1
[Note] : The [username], [password] and [ip address] are the username, password and ip address
from the IP camera. Make sure the M2-MVB is able to connect to the ip camera’s.
More information and FAQ on:
www.zepcam.com/support
13
Summary of Contents for Mobile Video Box M2
Page 1: ......
