background image

22

2. The Mainboard

The mainboard is the large circuit board located at the bottom
of the system unit case. It is the heart of your computer system.
This board contains the central processing unit (CPU),
secondary cache subsystem, expansion slots, ports and
connectors for other computer components, and the system main
memory or RAM.

Your mainboard includes:

Intel Pentium (TM) Processor running at 60Mhz, 66Mhz, or 90 Mhz

Small Computer System Interface (SCSI) host adapter socket

Optional 256K or 512K secondary system cache

Integrated Windows compatible Business Audio that supports
ADPCM compression

Integrated floppy drive controller

Two local bus IDE hard drive interface ports supporting up to 4 IDE
devices

Enhanced Parallel Port

Two full-function, RS232, 16550-compatible serial ports

High-speed system memory; expandable from 2MB to 192MB

Flash BIOS; relocatable to 32-bit high-speed RAM for faster
performance

Five 16-bit ISA expansion slots

Three 32-bit PCI, local bus, high-speed expansion slots

Clock/calendar with on-board battery backup

Mainboard Features

Chapter 2 - The Mainboard

Summary of Contents for PANTERA














































































Reviews: