-４１-
7
.
Notice of Reassembly
7-17 LHD-Throttle Lever Set Assembly
6.
Set the throttle lever to the wide open throttle
position. Connect the contact plate to the
terminal of the switch cords (black) and set it in
the throttle arm. Push the contact plate firmly into
the guide of the throttle arm.
7.
Attach the switch cords along the guide groove
of the throttle arm as shown.
8.
Pull the wire of the throttle cable and connect the
wire end to the lever plate.
9.
Attach the throttle cable end to the groove of the
throttle arm.
10.
Push the switch cords into the groove of the
throttle arm and set the stopper as shown.
11.
Attach the arm cover to the throttle arm with the
mounting screws.
Torque: 1.0
～
1.5N
･
m (10
～
15kgf
･
cm)
12.
Attach engine switch to arm cover.
Terminal
Contact Plate
Throttle Wire
Wire End
Contact Plate
Throttle Lever
Wide open throttle position
Switch Cords
Stopper
Engine Switch
Switch Cords
Screw (2)
TPM4x 20L (T27)
Engine Switch
Throttle
Arm
Lever Plate
Throttle Cable End
Arm Cover
