-４０-
7
.
Notice of Reassembly
7-17 LHD-Throttle Lever Set Assembly
1.
Cover the engine switch with the cap, pass the
switch cords through the arm cover.
2.
Place the switch cord connectors on the L shape
side of the throttle cable and pass them through
the corrugate tube.
3.
Pass the corrugated tube through the guide hole
of the throttle arm.
4. Align the stopper portion of the
throttle
lever at
the lever operation range (A) of the
throttle
arm
and insert the
throttle
lever in the hole of the
throttle
arm.
5. Set the wave washer and the lever plate to the
throttle
arm, and tighten the mounting bolt.
Throttle lever operating torque:
0.86
～
1.18N
･
m (8.7
～
12kgf
･
cm)
Cap
Engine Switch
Arm Cover
Corrugate Tube
Switch Cords
Throttle Cable
Wave Washer
Throttle Lever
Throttle
Arm
Lever Plate
Stopper
(A)
Connectors
Corrugated Tube
Guide Hole
Throttle Arm
Bolt
M5x 22L (T27)
Throttle Lever
