-１４-
5.
Special Tools
5-2 How to use
Item
Procedures
-2)
Coupling
Removal
1. Remove the recoil starter, the engine
cover, the intake hose, the fan, the volute
case and the spark plug.
2. Turn the rotor to the counterclockwise
(CCW) 90 degrees from the TDC.
Insert
the
recoil
rope into the cylinder from the
plug hole to stop the movement of the
piston.
3. Remove themounting nut of the coupling.
NOTE:
Turn the coupling counterclockwise
(CCW) slowly, contact the piston head
to the recoil rope lightly and loosen the
nut.
4. Set the puller (special tool)
to the coupling.
NOTE:
When attaching the puller bolts, screw
in more than half of the threaded
portion to the coupling.
5. Tighten the center bolt of the puller and
remove the coupling from the crankshaft.
Recoil Rope
Rotor
Coupling
“
S
”
Mark
Mounting Nut
(14 mm Hex)
17 mm Hex
Coupling
Puller Bolts
Puller
