ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
6
6
Figure 1.3. IRSC-Clima unit connection
Once IRSC is connected and the system is properly parameterized, it will be possible to control the
A/C unit from a touch panel of the installation (from the InZennio Z38i or InZennio Z41 touch panels,
for instance), thus achieving an easier and more intuitive control.
Note:
Each air ducted machine must be controlled only by one IRSC device.
To obtain a more detailed information about the technical features of IRSC, as well as security and
installation information, please read the controller Datasheet, included in the original package of the
device and also available at:
http://www.zennio.com
.
1.3. IRSC-ZONE APPLICATION PROGRAM
The
IRSC-Zone
application program has been developed for controlling
Air-
cooling/Heating ducted machines
, thus allowing acclimatizing, in the same KNX installation, up to
8 rooms (or zones) that have an air-conditioning output regulated by gates or
motorized grilles
.
Grilles are the final elements of the air ducts (in charge of distributing the air from the central unit to
every zone) and permit the air output to the different zones of the climate system.
IRSC-Zone is therefore in charge of two complementary functions.
Sending the necessary orders (ON/OFF, temperature, fan, etc) to the
central a/c
machine
through infrared commands.
Sending the necessary orders to the external KNX actuator that controls the
air grilles
.
