Zennio Touch-MyDesign Display One, Manual

Page: 46 / 48

Touch-MyDesign
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
46
SECTION NUMBER SIZE IN/OUT FLAGS
VALUES
NAME DESCRIPTION
RANGE 1st TIME RESET
INPUTS
89-90 1 bit I
W
0/1 0 Last [Ix] Lock 1=Input Disabled; 0=Input Free
91-92 1 bit I T W 0/1 0 0 [Ix] [Edge] Binary Control 1-bit generic control
93-94 4 bits O T R 0-15 0 Last
[Ix] [Short Press] Inc. Light / Stop Dim.
(Toggle)
Increase Light / Stop Dimming (Toggle)
95-96 1 Byte O T R 128-191 Irrelevant Irrelevant [Ix] [Short Press] Save Scene Save Scene -> Send. of 128-191
97-98 1 bit I/O T R W 0/1 0 Last [Ix] [Long Press] Binary Control: "0" 1-bit generic control;
99-100 4 bits O T R 0-15 0 Last
[Ix] [Long Press] Inc. Light / Stop Dim.
(Toggle)
Increase Light / Stop Dimming (Toggle)
101-102 1 Byte O
T R
128-191 Irrelevant Irrelevant [Ix] [Long Press] Save Scene Save Scene -> Send. of 128-191
103-104 2 Bytes O T R -20-95ºC 25ºC Last [Ix] Current Temperature Temperature sensor value
106-107 1 bit O T R 0/1 0 Last [Ix] Overcooling 1=Overcooling;0=No Overcooling
109-110 1 bit O
T R
0/1 0 Last [Ix] Overheating 1=Overheating;0=No Overheating
112-113 1 bit O
T R
0/1 Ac. to status Ac. to status [Ix] Probe Error 1=Error;0=No Error
114-115 1 bit O T R 0/1 0 0
[Ix] Short Circuit 1=Short Circuit;0=No Short Cir
116-117 1 bit O T R 0/1 0 0
[Ix] Open Circuit 1=Open Circuit;0=No Open Circ.
118-119 1 Byte O T R 0-100% Irrelevant Last
[Ix] Luminosity Level Luminosity on Input x
120-123 1 bit I W 0/1 0 0
[Ix][Ch.y] Channel enabling 1=Enable; 0=Disable
124-127 1 bit O T 0/1 Ac. to param Ac. to param.
[Ix][Ch.y] Detection Status According to parameters
128-131 1 Byte I W 0-63 Irrelevant Irrelevant
[Ix][Ch.y] Scene Reception 0-63 (Run Scene 1-64)