ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
15
15
Nevertheless, every active energy consumption values (that is hourly, daily, weekly and monthly
values) or average values (daily, weekly and monthly) that had been parameterized under ETS will
still be sent, although they will not reflect any consumption made while the channel stays disabled.
It is recommended to read the examples from Annex II.
All the parameters from the Active Energy, Active Power and Power Limit Monitoring screens as
well as their configurable values for each channel will be detailed in the next pages.
Note:
The screen captures shown here may refer to the configuration of Channel B. In that case,
similar parameterization and behaviours can be assumed for channels A and C.
3.3.1. ACTIVE ENERGY
This screen allows the configuration of several parameters related to the consumption of
active energy (Section 2.2). These show up grouped into sections, as explained below.
Estimated values.
This section allows the configuration of parameters regarding the
estimation of active energy consumption, expressed in kWh, as well as its estimated cost, in
terms of the local currency. This estimation of the active energy consumed is made assuming
that the instant power consumption at the moment of the estimation remains constant during
the 24 hours of the current day.
Figure 3.4. Active energy. Estimations.
