ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
12
12
Cyclical sendings
: these parameters are destined to enable/disable periodic sendings
that affect every active channel.
These periodic sendings include both, “security sendings” (in
other words, the re-sending of values that had already been calculated and reported to the
bus but that are sent again after certain periods) and consecutive sendings of certain updated
values. In order to achieve a better understanding of how KES counts these periods and the
exact
instant
when
the
sending
takes
place,
it
is
recommended
to
read
Annex I. Time management
.
Security sending of last daily values
: allows enabling the periodic sending of
values related to the previous day, with the option of selecting cycle times of 1, 2, 3, 4, 6
or 12
hours (choosing “0” disables this sending). This way, all the daily values that had
been enabled under
“Active energy” (see section
3.4. Active Energy
) will not only be sent
at the end of the day, but also during the following day, every time the selected period
expires.
Note
:
Regardless of
the selected period (0, 1, 2, 4, 6 or 12 hours), the re-sending of the
last daily values will not work unless at least one channel (A, B, C) is active and unless at
least one daily value has been enabled under the
“Active Energy” screen.
Security sending of last weekly values:
allows enabling the periodic sending of
values related to the previous week, with the option of selecting cycle times of 1 to 7 days
(choosing “0” disables this sending). This way, all the weekly values that had been
enabled under
“Active energy” (see section
3.4. Active Energy
) will not only be sent at the
end of the week, but also during the following week, every time the selected period
expires.
Note
:
Regardless of the selected period (0-7 days), the re-sending of the last weekly
values will not work unless at least one channel (A, B, C) is active and unless at least one
weekly value has been enabled under the “Active Energy” screen.
Security sending of last monthly values:
allows enabling the periodic sending of
values related to the previous month, with the option of selecting cycle times of 1 to 30
days (choosing “0” disables this sending). This way, all the monthly values that had been
enabled under “Active energy” (see section
3.4. Active Energy
) will not only be sent at the
end of the month, but also during the following month, every time the selected period
expires.
