Zennio InZennio Z38i, Manual, Page: 46 / 54

ZENN iO AVANCE Y TECNOLOGÍA www.zennio.com
46
 Darker: Reduces the lighting level with every press on the
screen, this parameter depends on the “Dimming Step”
set
A short press reduces the lighting level; a second press
stops the “Reduction”.
 Brighter/Darker (switched): Alternative Switching between
the orders Increase and Reduce Light level.
DIMMING STEP  Depending on the value selected, different
lighting levels are offered. Once selected the “DIMMER CONTROL”
option, it is necessary to set this parameter. See figure 2.6 to know
the available dimming steps.
SENDING OF A SCENE
This function results on sending a (1 byte) Scene Control Object to the bus;
a scene on the bus may be managed with the input through this Object.
RESPONSE

Choose whether the scene will be “Run” or “Saved”.
SCENE

This parameter identifies the scene to Run/Save with the
corresponding Input.
2.4.1.2. LONG PRESS
The configuration options are the same as in Short Press .
2.4.1.3. THRESHOLD TIME
This parameter defines the time limit where a short press turns into a long
press.