ZENN
iO
AVANCE Y TECNOLOGÍA
www.zennio.com
45
control them; this parameter moves lamellas a pull down
step. The value "1" is sent to the bus.
Stop/Switched Step: Stops the shutter. When talking
about shutters with lamellas, this mode allows the user to
control them; this parameter alternatively switches the
lamellas pull up and down steps.
Note I:
The “Stop shutter” configuration include 3 options of step up, step down
and switched step to lamellas control; but if the shutter does not have
directional lamellas available, any of the three options will stop the shutter.
Note II:
If the option "up/down (switched)" is chosen to short press, “stop
shutter” action will not be able to be done in any point of the trajectory with other
short key press over the same input.
DIMMER CONTROL
This function results on sending a 4 bits Dimming Control Object to the bus.
RESPONSE
Depending on the chosen option, the Control Object
may be:
Light ON: Turn the light ON. The value "1" is sent to the
bus.
Light OFF: Turn the light OFF. The value "0" is sent to the
bus.
Light On/Off (Switched): Alternative switching between
the ON/OFF orders (to manage the lighting level with an
only input).
Brighter: Every press on the screen increases the lighting
level; this parameter depends on the “Dimming Step” set.
A short press reduces the lighting level; a second press
stops the “Increase”.