ZENN
iO
AVANCE Y TECNOLOGÍA
www.zennio.com
31
Every enabled box for the timers control will have its own output "Channel"
(output object of the timers) through which the communication object in
charge of controlling the timer will go. The following parameters can be
configured for every enabled box:
Name
This field allows a user to associate a name with the
corresponding box in the page. (11 free characters are available to
set the name).
Linked to scenes
When this box is enabled, a user can control
Scenes by mean of a programming. The possible control
associations are:
Only for Timer ON:
The
Scene Number (On)
box will
appear where it is needed to write the scene number to
execute when the ON programming set by the user is
fulfilled.
Only for Timer OFF:
The
Scene Number (Off)
box
will appear where it is needed to write the scene
number to execute when the OFF programming set by
the user is fulfilled.
Both Timer ON and OFF:
The
Scene Number (On)
box and
Scene Number (Off)
will appear.
Note I:
These associations are solved through internal links; this means it
is not necessary any kind of addressing process to carry out Schedule
Programming associated to Scenes.
Note II:
when many different schedule programming send different scenes
at the same moment, just one of them will be sent, specifically, the scene
linked to the last box of the last schedule programming page
.
Please see the following example:
It is parameterized in ETS the specific pages 1 and 3 as Timer pages. The
Timer page 1 is configured like this:
- Box 2
linked to scene number 64. Only for ON