Zennio GetFace IP
Tecnical Support
25
3.1.5
DOOR CONFIGURATION
The section
Hardware
Door
groups the configuration parameters needed to control
the door opening and its access rules.
DOOR
This tab contains the general configuration of the door, which will be applied regardless
of the access direction.
Figure 15
Door.
Door Lock
: assignation of the switch to be controlled. Its configuration is
explained in the next section.
Door Open Sensor
: an input can be assigned to monitor the door’s state. It
is possible to detect unauthorised openings and excessively long opened
times, where the time can be parameterised.
REX Input Control
section allows configuring one of the GetFace IP inputs to
function as an output button, so that when this input is activated the output
associated with the gate will be opened. This feature will be useful if required
an indoor switch to activate the door opening.
