Zennio GetFace IP
Tecnical Support
28
The codes must have 2 characters minimum, but is recommended to use
at least a 4-charater code.
The procedure to add or delete a code is:
Enter Plus Code and press the key button
(ZVP-KEYPAD) or
Open
door
(ZVP-TOUCHD).
If a new user code is being added, enter the number of the switch to be
controlled and press the key button or
Open door
.
Enter the new code to add or an existent code to delete, and press the
key button or
Open door
.
After each of these steps, a visual and acoustic notification will be given if the
step has been successfully completed.
It is possible to add as many codes as available users (up to 10,000).
Example to register
: If the Code to add is 1111, to register code 1234 associated with
the opening of lock 1, proceed as follows (
1111
1
1234
):
Enter the Plus Code (
1111
).
Press the key
.
Insert the switch to be controlled: 1, 2 or 3 (
1
).
Press the key
.
Enter the new code (
1234
).
Press the key
.
Example to delete
: If the delete code is 0000, to unsubscribe code 1234, proceed as
follows (
0000
1234
):
Enter the Minus Code (
0000
).
Press the key
.
Enter the code to be removed (
1234
).
Press the key
.
