Zennio GetFace IP
Tecnical Support
34
Figure 21
Access Log.
The ID just obtained should be entered into the corresponding textbox.
Virtual Card ID
is the value to resend to Wiegand Group configured.
Card activation time profiles can be configured in
Directory
Time Profiles
(see
section 3.2.2.1). If no time profile is configured, make sure that in section
Users
Access Setting
, the access profile
[not used]
is selected.
On the tab
Hardware
Extenders
will be more options for the module configuration.
Module name
: sets the module name for logging events from the Bluetooth
module.
Door
: sets the reader direction (None, Door Entry, Door Exit).
Associated switch
: sets the Door Lock Switch or the number of the switch to
be activated after user authentication via this module.
Each RFSMN module can only be associated with one switch, but with
‘Automation’ it is possible to create a function that allows the activation of other
switch based on some criteria. For this purpose, the option "None" of this field
could be useful, and thus a concrete switch would not be always activated.
Allowed Card Types
: sets the card types supported by the module.
Forward to Wiegand output
– set a group of Wiegand outputs that will
receive the virtual card IDs configured.
