AudioInRoom
http://www.zennio.com
Technical Support:
http://support.zennio.com
11
Note
:
The first sending after download or bus failure takes place with a delay
of up to 255 seconds, according to the individual address, to prevent bus
overload. The following sendings match the period set
.
Bluetooth Audio Module
[
enabled
]: Bluetooth module is the main
functionality of the AudioInRoom and is enabled permanently. For more
information, see section 2.2.
2.2
BLUETOOTH AUDIO MODULE
AudioInRoom allows the user to control and configure the Bluetooth module so that
suiting this functionality to the desired operation is possible:
Device Name:
customizable name for easy AudioInRoom identification while
searching and pairing devices via Bluetooth.
PIN:
parameterisable four-digit numeric value allowing secure connection and
pairing with authorized user devices.
Playback Channels:
audio output channels. AudioInRoom has two
independent stereo channels with two setup options for audio playback mode:
➢
Stereo:
each of two tracks which form the audio signal is played through
one of the speakers (or subchannels), recreating a more natural listening
experience.
➢
Mono:
the two tracks sound together through each speaker (or
subchannel) and it is possible even disconnecting one of these speakers
without altering the audio output.
Playback control
using KNX objects. There are two controls:
➢
Play/Stop
: allows starting and pausing the audio playback of user device.
➢
Skip
: allows playing the next track or playing back the previous one.
Volume Control.
AudioInRoom volume control depends directly on the
Bluetooth of the device connected. Thus, three different volume controls are
possible:
