AudioInRoom
http://www.zennio.com
Technical Support:
http://support.zennio.com
14
On/Off Object
[
enabled
/disabled
]: enables or disables the 1-bit object
"
[Audio] On/Off
", which allows switching on / off the Bluetooth module.
Moreover, the Bluetooth module status can be checked by reading the 1-bit
object
“
[Audio] On/Off (Status)
”.
Device Name
[
Zennio AiR
]: default name of the Bluetooth module to identify
the AudioInRoom when pairing. This is the name set when a Check-out
process is performed.
➢
Device Name Change Object
[
enabled
/disabled
]: when enabled, it is
possible to change the name of the device through the 14-bytes object
“
[Audio][BT] Name
”. The name saved in this object can be checked by
reading the 14-
bytes objects “
[Audio][BT] Name (Status)
”. This is the
name set when a Check-in process is performed.
Note
:
the status object "[Audio][BT] Name (status)" does not always
indicate the current device name; it indicates the name that has been
recorded in the object "[Audio][BT] Name" and that will be set on the
device by Check-in
.
Customized Pairing PIN
[
enabled
/disabled
]: when enabled, the default
pairing PIN can be modified:
➢
PIN
[
0000
…9999
]: default PIN of the Bluetooth module for device pairing.
This is the PIN set when a Check-out process is performed.
➢
PIN Object
[
enabled
/disabled
]: enables the 14-bytes object
“
[Audio][BT]
PIN
” to modify the PIN value. The PIN saved in this object can be checked
by reading the 14-
bytes objects “
[Audio][BT] PIN (Status)
”. This is the
PIN set when a Check-in process is performed.
Notas:
•
If a PIN outside the allowed range [0000-9999] is entered in the
"[Audio][BT] PIN" object, it is ignored and updated to the parameter-set
value.
•
The status object "[Audio][BT] PIN (status)" does not always indicate
the current device PIN; it indicates the PIN that has been recorded in
